Gravity: Waterproof DS18B20 Sensor Kit(KIT0021)

KIT0021
AA0774

The DS18B20 temperature sensor provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and ground) needs to be connected from a central microprocessor. Compatible with 3.0-5.5V systems.

1211
Χωρίς ΦΠΑ: 9.77
Σε Απόθεμα
+
Στα Αγαπημένα Σύγκριση
Παράδοση
  • — ELTA Courier
  • — ACS Courier
  • — ΓΕΝΙΚΗ ΤΑΧΥΔΡΟΜΙΚΗ
Τρόποι πληρωμής

INTRODUCTION

This waterproof temperature sensor kit use DS18B20 probe AS . It contains a probe with a resistor module. So it is easy to connect on the Arduino board.

The DS18B20 temperature sensor provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and ground) needs to be connected from a central microprocessor. Compatible with 3.0-5.5V systems.

Check 27 Pcs Sensor Kit for Arduino to get more sensors for arduino.

ESP32 Bluetooth(BLE) Temperature Sensor

SPECIFICATION

Operating voltage: 3.0~ 5.5V

±0.5°C Accuracy from -10°C to +85°C

Usable temperature range: -55 to 125°C (-67°F to +257°F)

9 to 12 bit selectable resolution

Uses 1-Wire interface- requires only one digital pin for communication

Unique 64 bit ID burned into chip

Multiple sensors can share one pin

Temperature-limit alarm system

Query time is less than 750ms

3 wires interface:

Type A

Red wire - VCC

Black wire - GND

Yellow wire - DATA

Type B

Red wire - VCC

Yellow wire - GND

Green wire - DATA

Stainless steel tube 6mm diameter by 35mm(1.34") long

Cable diameter: 4mm(0.16")

Length: 90cm(35.43")

MANUFACTURER
DFROBOT
MPN
KIT0021
Δείτε Παρόμοια Προϊόντα
  • Προβλήθηκαν Πρόσφατα