CREALITY ENDER-3 MAX - 300*300*340 MM

Ender-3 MAX
PA0010
MANUFACTURERCREALITY MPNEnder-3 MAX
Ender 3 Max is the latest version of the popular Ender 3 series from the well-known manufacturer – Creality. It´s an affordable, large size printer that have a print volume of 300 x 300 x 340mm. Heated build platform The build plate can be heated to a maximum of 100°C. Thanks to this you...
32240
Χωρίς ΦΠΑ: 260.00
Μη Διαθέσιμο
Παράδοση
  • — ELTA Courier
  • — ACS Courier
  • — ΓΕΝΙΚΗ ΤΑΧΥΔΡΟΜΙΚΗ
Τρόποι πληρωμής

Ender 3 Max is the latest version of the popular Ender 3 series from the well-known manufacturer – Creality. It´s an affordable, large size printer that have a print volume of 300 x 300 x 340mm.

Heated build platform

The build plate can be heated to a maximum of 100°C. Thanks to this you print most common filaments such as PLA, PLA Tough, PETG and other similar materials without running the risk of warping.

Borosilicate glass plate

Thanks to the very hard glass plate you will get silky smooth prints that sticks very well. For extra security wo do recommend using, for example, PrimaFIX to make you prints stick even better.

Dual cooling fans

The dual axial cooling fan always makes sure that the filament cools down as quickly as possible. The is very important if you print much in PLA.

Powerful hot end

The Ender 3 max is equipped with a modular hot end. This ensures that your result always will be the best possible

Resume print function

Did the power suddenly or accidentally go off? No worries! The Ender 3 Max 3D Printer will resume printing if the power supply is interrupted. That’s right—you can forget about starting over because print failure is no longer an issue!

Intelligent sensor with filament breakage detector

Sometimes filament can run out, or in worst case – break. Thanks to the new intelligent sensor, the printer will stop the current print so you can change filament. Once that is don, you can continue the print as nothing had happened.

Power when you need it

The 350-w power supply makes sure that you have a perfect flow of power in every situation. You can switch between 100V – 240V.

High performance drivers

Thanks to the TMC2208 drivers that are in use in the X and Y axis, you will get a very smooth and silent running

Upgrade friendly

The manual leveling system works very well, but if you for some reason would prefer a auto level-system, the Ender3 Max in prepared for this. There is already space reserved for this option on the printer.

Construction an Technical Details
Usable Nozzle TypMK8
Usable Filament Diameter1,75 mm
Nozzle Temperatur Max250 °C
Open Filament SystemYes
Extruder TypBowden
Printing Speed Max180 mm/s (depends on material)
Build Area300 mm x 300 mm x 340 mm
Heated Build PlateYes
Build Plate Temperature Max100 ºC
Build Plate MaterialCarborundum glass plate
Build Plate Attachmentclamp
Build Plate Leveling SystemBL-Touch optional
Build Chamber During ProcessOpen
Extruder Number1
Installation Space / Requirements
Total Mass513 mm x 563 mm x 590 mm
Total Weight9,5 kg
Power Consumption Max350 W
VoltageAC: 100 V - 240 V (50/60 Hz) DC: 24 V
Equipment
Filament Runout SensorYes
Powerloss Fail SafeYes
Connection
Memory CardYes, micro-SD
USBYes, 1x micro USB
Accuracy
Layer Height0,1 mm - 0,4 mm
Resolution0,1 mm
MANUFACTURER
CREALITY
MPN
Ender-3 MAX
Δείτε Παρόμοια Προϊόντα
  • Προβλήθηκαν Πρόσφατα