WANHAO DUPLICATOR D12/300 - DUAL EXTRUDER - 300*300*400MM

D12/300/DUAL-300
PA0013
MANUFACTURERWANHAO MPND12/300/DUAL-300
Construction and Technical Details Usable Nozzle Typ MK12 Usable Filament Diameter 1,75 mm Nozzle Temperatur Max 255 °C Open Filament System Yes Extruder Typ Bowden...
42036
Χωρίς ΦΠΑ: 339.00
Μη Διαθέσιμο
Παράδοση
  • — ELTA Courier
  • — ACS Courier
  • — ΓΕΝΙΚΗ ΤΑΧΥΔΡΟΜΙΚΗ
Τρόποι πληρωμής
Construction and Technical Details
Usable Nozzle Typ MK12
Usable Filament Diameter 1,75 mm
Nozzle Temperatur Max 255 °C
Open Filament System Yes
Extruder Typ Bowden
Printing Speed Max 150 mm/s (depends on material)
Build Area 300 mm x 300 mm x 400 mm
Dual Build Area 300 mm x 300 mm x 400 mm
Heated Build Plate Yes
Build Plate Temperature Max 105 ºC
Build Plate Surface adhesive sheet
Build Plate Material Flexible Steel Plate
Build Plate Attachment magnetic
Build Plate Leveling System manual Leveling
Build Chamber During Process Open
Extruder Number 2
Extruder Construction Typ Dual 1 Nozzle, mixed
Installation Space / Requirements
Total Mass 575 mm x 510 mm x 720 mm
Total Weight 12 kg
Voltage AC: 110 V - 250 V, 4 A (50/60 Hz)
Equipment
Filament Runout Sensor Yes
Powerloss Fail Safe Yes
TouchScreen Yes
Connection
Memory Card Yes, micro-SD
USB Yes, 1 x USB-B
WLAN Yes
Accuracy
Layer Height 0,1 mm - 0,4 mm
Shipping
Shipping Box 535 mm x 480 mm x 275 mm
Shipping Weight 16 kg


Wanhao D12

Wanhao is back again with an exemptional price performance ratio with their new 3D-Printer.

The main features of this new printer are:

  • Two colour printing
  • Dual extruders to one hotend
  • Good build volume 300x300x400mm
  • 3,5” Touch screen with preview function
  • WIFI support
  • Filament sensor
  • Power failure resume printing
  • Quit TMC2209 stepper drivers
  • Adjustable Belt Tensioner

Built around a frame with high quality aluminium profiles this sturdy machine achieves stunning results.

You can print with two different colours or use support material like PVA thanks to the design with double extruders feeding to one hotend.

Easier than normal dual extrusion as you only need to level one nozzle. Or just convenient to have your two favourite filaments loaded booth at the same time ready for printing.

Nice 5” colour display with touch function. Smart and intuitive menu system where you can preview the model being printed.

WIFI support so you can communicate direct with your printer without cables.

Magnetic spring plate makes it easy to remove the printer models after finished print.

New developed MK12 extruder with efficient cooling system for the nozzle. Improved high-torgue feeding mechanism. Small Bowden tube feeding the hotend with less weight on the moving part, this means that you can improve print speeds.

Easy to adjut the X-Axis belt so you can fine tune your print result to get it even more accurate.

Easy levelling with larger levelling nuts that are easy to adjust.

Filament run out sensor with automatic resume

Very easy to assemble even for a novice. Units comes pre-assembled; all you need to do is to fasten a few screws. You will be printing in no-time.

Wanhao D12 Wanhao D12 Wanhao D12 Wanhao D12 Wanhao D12 Wanhao D12 Wanhao D12 Wanhao D12 Wanhao D12 Wanhao D12 Wanhao D12 Wanhao D12 Wanhao D12 Wanhao D12 Wanhao D12 Wanhao D12 Wanhao D12 Wanhao D12 Wanhao D12

MANUFACTURER
WANHAO
MPN
D12/300/DUAL-300
Δείτε Παρόμοια Προϊόντα
  • Προβλήθηκαν Πρόσφατα