COPYMASTER PLA -1.75MM - 1KG - DEEP BLACK

PRE-1KG-DEE
AA2427
MANUFACTURERCOPYMASTER3D MPNPRE-1KG-DEE
PLA from Copymaster3D is a high-quality filament that can be used in many applications when it comes to 3d-printing. We also offer Copymaster3D in a wide range of colors so you can be sure of finding your personal favorite. PLA is based on polylactic acid and is fully biodegradable and emits no...
1612
Χωρίς ΦΠΑ: 13.00
Σε Απόθεμα
+
Στα Αγαπημένα Σύγκριση
Παράδοση
  • — ELTA Courier
  • — ACS Courier
  • — ΓΕΝΙΚΗ ΤΑΧΥΔΡΟΜΙΚΗ
Τρόποι πληρωμής

PLA from Copymaster3D is a high-quality filament that can be used in many applications when it comes to 3d-printing. We also offer Copymaster3D in a wide range of colors so you can be sure of finding your personal favorite. PLA is based on polylactic acid and is fully biodegradable and emits no toxic fumes. This means that you don’t have to worry about using the filament indoors with children or pets nearby. Copymaster3D PLA also has the benefit of very low shrinkage, this means that you will have very accurate prints, but also that the risk of warping is very low. Even though a heated build platform isn´t required we do recommend it as you will get the best adhesion. To be extra sure that the print sticks well to the build plate we recommend that you use PrimaFIX. It will make the prints stick better but will also make it much easier to remove the print from the build surface once it cools off. If you use the heated bed we recommend a temperature between 30-60°C


Filament TypPLA
Diameter1,75 mm
Tolerance0,05 mm
Weight1,00 kg
Lenght335 m
Colorblack
Printing Parameter
Recomended Printing Temp Min190 ºC
Recomended Printing Temp Max220 ºC
Recomended Printbed Temperature Min0 ºC
Recomended Printbed Temperature Max45 ºC
Recomended Printing Speed Min40 mm/s
Recomended Printing Speed Max150 mm/s
Recomended Fan Speed Min60 %
Recomended Fan Speed Max100 %
General
Specific gravity1,24 g/cm3 ASTM D792
Temperature
Heat deflection temp50 °C
Tensile
Tensile strength45 MPa
Elongation
Elongation at yield5,3 % ASTM D638
Elongation at break13,3 % ASTM D638
Flexural
Flexural Strenght63,64 % ISO 178
Flexural Modulus2157 ISO 178
Other
Impact Strength17 KJ/m2 ISO 179
MANUFACTURER
COPYMASTER3D
MPN
PRE-1KG-DEE
Δείτε Παρόμοια Προϊόντα
  • Προβλήθηκαν Πρόσφατα