Αρχική/3D PRINTERS/CNC/3D FILAMENTS & RESINS/COPYMASTER PLA -1.75MM - 1KG - DEEP BLACK

COPYMASTER PLA -1.75MM - 1KG - DEEP BLACK

Κωδικός Κατασκευαστή (MPN): PRE-1KG-DEE

ΚΩΔΙΚΟΣ: AA2427

MANUFACTURERCOPYMASTER3D MPNPRE-1KG-DEE

€16¹²

Χωρίς ΦΠΑ: €13.00

Μη Διαθέσιμο

Παράδοση

— ELTA Courier
— ACS Courier
— ΓΕΝΙΚΗ ΤΑΧΥΔΡΟΜΙΚΗ

Τρόποι πληρωμής

Περιγραφή
Χαρακτηριστικά
Skroutz Αξιολογήσεις

PLA from Copymaster3D is a high-quality filament that can be used in many applications when it comes to 3d-printing. We also offer Copymaster3D in a wide range of colors so you can be sure of finding your personal favorite. PLA is based on polylactic acid and is fully biodegradable and emits no toxic fumes. This means that you don’t have to worry about using the filament indoors with children or pets nearby. Copymaster3D PLA also has the benefit of very low shrinkage, this means that you will have very accurate prints, but also that the risk of warping is very low. Even though a heated build platform isn´t required we do recommend it as you will get the best adhesion. To be extra sure that the print sticks well to the build plate we recommend that you use PrimaFIX. It will make the prints stick better but will also make it much easier to remove the print from the build surface once it cools off. If you use the heated bed we recommend a temperature between 30-60°C

Filament Typ	PLA
Diameter	1,75 mm
Tolerance	0,05 mm
Weight	1,00 kg
Lenght	335 m
Color	black

Printing Parameter
Recomended Printing Temp Min	190 ºC
Recomended Printing Temp Max	220 ºC
Recomended Printbed Temperature Min	0 ºC
Recomended Printbed Temperature Max	45 ºC
Recomended Printing Speed Min	40 mm/s
Recomended Printing Speed Max	150 mm/s
Recomended Fan Speed Min	60 %
Recomended Fan Speed Max	100 %

General
Specific gravity	1,24 g/cm3 ASTM D792

Temperature
Heat deflection temp	50 °C

Tensile
Tensile strength	45 MPa

Elongation
Elongation at yield	5,3 % ASTM D638
Elongation at break	13,3 % ASTM D638

Flexural
Flexural Strenght	63,64 % ISO 178
Flexural Modulus	2157 ISO 178

Other
Impact Strength	17 KJ/m2 ISO 179

Προβλήθηκαν Πρόσφατα