COPYMASTER PLA - 1.75MM - 1KG - NAVY BLUE

PLA from Copymaster3D is a high-quality filament that can be used in many applications when it comes to 3d-printing. We also offer Copymaster3D in a wide range of colors so you can be sure of finding your personal favorite. PLA is based on polylactic acid and is fully biodegradable and emits no toxic fumes. This means that you don’t have to worry about using the filament indoors with children or pets nearby. Copymaster3D PLA also has the benefit of very low shrinkage, this means that you will have very accurate prints, but also that the risk of warping is very low. Even though a heated build platform isn´t required we do recommend it as you will get the best adhesion. To be extra sure that the print sticks well to the build plate we recommend that you use PrimaFIX. It will make the prints stick better but will also make it much easier to remove the print from the build surface once it cools off. If you use the heated bed we recommend a temperature between 30-60°C

Filament TypPLADiameter1,75 mmTolerance0,05 mmWeight1,00 kgLenght335 mColordark blue Printing ParameterRecomended Printing Temp Min190 ºCRecomended Printing Temp Max220 ºCRecomended Printbed Temperature Min0 ºCRecomended Printbed Temperature Max45 ºCRecomended Printing Speed Min40 mm/sRecomended Printing Speed Max150 mm/sRecomended Fan Speed Min60 %Recomended Fan Speed Max100 %General Specific gravity1,24 g/cm3 ASTM D792Temperature Heat deflection temp50 °CTensile Tensile strength45 MPaElongation Elongation at yield5,3 % ASTM D638Elongation at break13,3 % ASTM D638Flexural Flexural Strenght63,64 % ISO 178Flexural Modulus2157 ISO 178Other Impact Strength17 KJ/m2 ISO 179