ESUN EPLA-SILK 1.75mm Rainbow 1kg

eSun ePLA-Silk

Shiny surface with silk luster, giving smooth, pearly and unique touch. No extra polishing needed, printing at a high detail results in a beautiful finish. Unique silky smooth appearance gives out shiny eye-popping glossy prints,

Stable Dimensional ToleranceStable Dimensional Tolerance

Minimum tolerance and low warping to ensure consistent feeding and stable prints, good layer bonding, less stringing, no bubbles, no cracking, easy handling, resulting in an outstanding surface finish and are highly precise.

Tangle Free & No Plugging

1KG filament reel, perfect roundness and very tight diameter tolerance, does not overlap or tangle. Melt well, feed smoothly and constantly without clogging the nozzle or extruder, high successful printing rate.

Wide Application

Silk PLA adds shiny and smooth effect based on ordinary PLA, which is perfect for arts & crafts projects, vases and any other 3D printed items that could benefit from a outstanding shiny appearance.

Good Printability

Support structure is easy to peel off, smooth and flat printed surface; High toughness, not easy to break; Keep all the advantages of PLA, easy to print, low shrinkage, no deformation; Printing speed is faster than ABS, PC, PA and other material.

Basic DataFilament TypPLADiameter1,75 mmWeight1,00 kgLenght344 m Printing ParameterRecomended Printing Temp Min190 ºCRecomended Printing Temp Max230 ºCRecomended Printbed Temperature Min45 ºCRecomended Printbed Temperature Max60 ºCRecomended Printing Speed Min40 mm/sRecommended Printing Speed Max100 mm/sRecomended Fan Speed Max100 >#b###General Specific gravity1,21 g/cm3   GB/T 1033Elongation Elongation at break14,4 %   GB/T 1040Flexural Flexural Strenght65 MPa   GB/T 9341Flexural Modulus1447 MPa   GB/T 9341Other Impact Strength5,86 KJ/m2   GB/T 1843