eSun PETG
PETG filament is a high cost performance 3D Printer material with water resistance, chemical resistance and high toughness. PETG combines the advantages of PLA and ABS.
Stable Dimensional Tolerance
Minimum tolerance and low warping to ensure consistent feeding and stable prints, good layer bonding, less stringing, no bubbles, no cracking, easy handling, resulting in an outstanding surface finish and are highly precise.
Tangle Free & No Plugging
1KG filament reel, perfect roundness and very tight diameter tolerance, good winding, does not overlap or tangle. Melt well, feed smoothly and constantly without clogging the nozzle or extruder.
High Compatibility
PETG has the advantages of high toughness and good mechanical properties (like ABS), also has the characteristics of ease to print and minimum warping (like PLA). Widely used in toys, stationery, electronic accessories, cosmetic container, etc.
Vacuumed Sealed Packaging
Filament Net Weight: 1KG. eSUN filament comes in a sealed vacuum bag with a desiccant bag, easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.
Basic Data | |
Filament Typ | PETG |
Diameter | 1,75 mm |
Weight | 1,00 kg |
Lenght | 327 m |
| |
Printing Parameter | |
Recomended Printing Temp Min | 230 ºC |
Recomended Printing Temp Max | 250 ºC |
Recomended Printbed Temperature Min | 75 ºC |
Recomended Printbed Temperature Max | 90 ºC |
Recomended Printing Speed Min | 40 mm/s |
Recommended Printing Speed Max | 100 mm/s |
Recomended Fan Speed Max | 100 >#/td### |
| |
General | |
Specific gravity | 1,27 g/cm3 GB/T 1033 |
| |
Elongation | |
Elongation at break | 83 % GB/T 1040 |
| |
Flexural | |
Flexural Strenght | 58,1 % GB/T 9341 |
Flexural Modulus | 1073 GB/T 9341 |
| |
Other | |
Impact Strength | 4,7 KJ/m2 GB/T 1843 |