PRIMACREATOR VALUE FLEX UV RESIN - 500 ML - CLEAR

PV-RF-B405-0500-CL
AA2452
MANUFACTURERPRIMACREATOR MPNPV-RF-B405-0500-CL
Main advantages of PrimaCreator Value Flex Resin: Shore hardness of 65-75 D & elongation at break of 130% 3D print high detail results that needs to have a very high impact strength 3D print flexible objects with very small shrinkage Optimized for UV Lightsource 395 – 405 nm. Performs...
4514
Χωρίς ΦΠΑ: 36.40
Σε Απόθεμα
+
Στα Αγαπημένα Σύγκριση
Παράδοση
  • — ELTA Courier
  • — ACS Courier
  • — ΓΕΝΙΚΗ ΤΑΧΥΔΡΟΜΙΚΗ
Τρόποι πληρωμής

Main advantages of PrimaCreator Value Flex Resin:

  • Shore hardness of 65-75 D & elongation at break of 130%
  • 3D print high detail results that needs to have a very high impact strength
  • 3D print flexible objects with very small shrinkage
  • Optimized for UV Lightsource 395 – 405 nm.
  • Performs well on low powered DLP 3D printers
  • Fast curing time, 4 - 12 (depending on color) seconds per layer – for quicker prints

Cleaning of PrimaValue Flex 3D prints

After printing, clean your 3D print in IPA (Isopropyl Alcohol) to rinse off resin left on the model.

Curing the finished & washed 3D prints

  • When it´s time for curing you can use sunlight or a uv curing chamber.Depending on print the curing times can vary: In a UV light curing chamber, it will take about 2-5 minutes. In sunlight, 10-20 minutes. In daylight on a cloudy day, it can take up to 60 minutes.
Flexural modulus1.882 - 2.385 MPa
Flexural strength 40-70 MPa
Hot deformation temp.80 ℃
Thermal expansion95*E-6
Volume shrinkage3.72 - 4.24%
Linear shrinkage1.05 - 1.35%
Tensile strength30 - 52 MPa
Tensile modulus1.779 - 2.385 MPa
Elongation at break130%
Hardness (Shore D)65 - 75D
Glass transition temp.100 ℃
Density1.05-1.25g/cm3
Notched impact strength41-48 j/m
Viscosity150-300 MPa·s
Curing time4 - 12s for layer thickness 0.05 mm
Bottom layer 40 - 60 s
MANUFACTURER
PRIMACREATOR
MPN
PV-RF-B405-0500-CL
Δείτε Παρόμοια Προϊόντα
  • Προβλήθηκαν Πρόσφατα