PrimaSELECT METAL – Buy 3D printer metal filament in Copper, Bronze & Brass
PrimaSELECT Metal is an exciting new type of filament, which takes 3D printing to a new level. With the new metal 3D printing material we have introduced a filament that contains 80% metal powder! This material is as close to real metal you can come in the filament industry for FDM/FFF printers. PrimaSELECT Metal is available in Copper, Bronze and Brass.
Why should I work with PrimaSELECT Metal?
- Authentic metal look and feel – Contains 80% pure metal particles
- Polish your metal 3D prints to get a shiny metal surface
- Easy to work with because it is a PLA-based material
- Works on most FFF/FDM 3D printers
- Available in Copper, Bronze and Brass
Real metal feeling with metal 3D printer filament
PrimaSELECT Metal is an exciting new type of filament, which takes 3D printing to a new level. With thi new metal 3D printing material we have introduced a filament that contains 80% metal powder! This material is as close to real metal you can come in the filament industry for FDM/FFF printers. PrimaSELECT Metal is available in Copper, Bronze and Brass.
Real metal feeling with metal 3D printer filament
There´s many benefits by using metal powder. You will experience a real metal feel when you touch it. Objects made from this filament have that cold feeling that you have when you touch copper or bronze. When it comes to weight SELECT Bronze/Copper is about 3-4 times heavier than regular PLA which also enhances the feeling of real metal. Thanks to the metal powder there´s even less shrinkage when 3D printing with this filament.
3D print metal filament on most FFF/FDM 3D printers
You can use PrimaSELCT Bronze/Copper on almost any FFF/FDM 3D printer on the market. The filament has been tested on a number of different set ups with both Bowden and direct drive 3D printers. Due to the abrasive nature of metal 3D printer filament, we recommend that you use a hardened steel nozzle* with this filament. It 3D prints great with a regular brass nozzle also but the wear and tear is bigger and the risk for wearing out your nozzle increases.
Post processing of metal 3D printer filament
Post processing is fun with this filament, as you can make it look just like a cast molded model. When your 3D print is done, it looks almost like clay. Then you can use some polishing techniques to bring out that metal gloss. A rotary tumbler is the easiest way of handling the finished 3D print. You can just tumble it for a few hours or until you have the finish you are looking for.
You can also use some fine grit sandpaper (600) and polish your 3D print to the desired finish. Polish the model with sandpaper and water. The longer you polish, the better the shine will be. If you wish, you can finish with some metal polish for that perfect look.
3D printing settings for metal 3D printer filament
SELECT Bronze/Copper works great without a heated bed, but if you have it, we recommend a setting of 35-60 °C.
PrimaSELECTMetal sticks on BuildTak or glass plate coated with adhesive spray or glue stick.
.png?1671784274334)
