PRIMASELECT PLA GLOSSY - 1.75MM - 750 G - OCEAN BLUE

PS-PLAG-175-0750-OB
AA2308
MANUFACTURERPRIMASELECT MPNPS-PLAG-175-0750-OB
Material properties PrimaSELECT PLA Glossy: Noble glossy surface Easy to 3D print with most 3D printers Wide temperature range of 210°C – 230°C Made from the purest PLA 3D print amazing creations in beautiful colors Heat resistant up to 75°C No harmful fumes 3D print strong & heat...
2740
Χωρίς ΦΠΑ: 22.10
Σε Απόθεμα
+
Στα Αγαπημένα Σύγκριση
Παράδοση
  • — ELTA Courier
  • — ACS Courier
  • — ΓΕΝΙΚΗ ΤΑΧΥΔΡΟΜΙΚΗ
Τρόποι πληρωμής

Material properties PrimaSELECT PLA Glossy:

  • Noble glossy surface
  • Easy to 3D print with most 3D printers
  • Wide temperature range of 210°C – 230°C
  • Made from the purest PLA
  • 3D print amazing creations in beautiful colors
  • Heat resistant up to 75°C
  • No harmful fumes

3D print strong & heat resistant objects with PLA Glossy

PLA Glossy is a new type of PLA that is much stronger than regular PLA and has a heat resistance up to 75°C. This means that you can use it for mechanical parts. For example, you can use the 3D printed parts in a hot car during summer without the risk of your 3D print getting soft.

How to 3D print PLA Glossy

PLA Glossy is used the same way as regular PLA, but in a slightly higher temperature range.Your 3D printing temperature should be between 210 – 230°C (typical is 220°C). The filament should be used with a heated build plate for best results. Depending on the size of your 3D print, you can use it within a range of 20 – 90°C (typical is 60°C). For regular 3D prints set the print speed to 40-60 mm/s.

We recommend that you use PrimaFIX on your build surface for best adhesion and to avoid warping.


MaterialPLA
Diameter1.75mm
Tolerance± 0.05 mm
Heated build platform required20-90°C
Print Temperature210 - 230 °C
Weight Filament750 g
Spool Size200 x 55 mm
Spool Hub Diameter53 mm
MANUFACTURER
PRIMASELECT
MPN
PS-PLAG-175-0750-OB
Δείτε Παρόμοια Προϊόντα
  • Προβλήθηκαν Πρόσφατα