Construction and Technical Details
Usable Nozzle Typ
MK12
Usable Filament Diameter
1,75 mm
Nozzle Temperatur Max
255 °C
Open Filament System
Yes
Extruder Typ
Bowden
Printing Speed Max
150 mm/s (depends on material)
Build Area
300 mm x 300 mm x 400 mm
Dual Build Area
300 mm x 300 mm x 400 mm
Heated Build Plate
Yes
Build Plate Temperature Max
105 ºC
Build Plate Surface
adhesive sheet
Build Plate Material
Flexible Steel Plate
Build Plate Attachment
magnetic
Build Plate Leveling System
manual Leveling
Build Chamber During Process
Open
Extruder Number
2
Extruder Construction Typ Dual
1 Nozzle, mixed
Installation Space / Requirements
Total Mass
575 mm x 510 mm x 720 mm
Total Weight
12 kg
Voltage
AC: 110 V - 250 V, 4 A (50/60 Hz)
Equipment
Filament Runout Sensor
Yes
Powerloss Fail Safe
Yes
TouchScreen
Yes
Connection
Memory Card
Yes, micro-SD
USB
Yes, 1 x USB-B
WLAN
Yes
Accuracy
Layer Height
0,1 mm - 0,4 mm
Shipping
Shipping Box
535 mm x 480 mm x 275 mm
Shipping Weight
16 kg
Wanhao D12
Wanhao is back again with an exemptional price performance ratio with their new 3D-Printer.
The main features of this new printer are:
Two colour printing
Dual extruders to one hotend
Good build volume 300x300x400mm
3,5” Touch screen with preview function
WIFI support
Filament sensor
Power failure resume printing
Quit TMC2209 stepper drivers
Adjustable Belt Tensioner
Built around a frame with high quality aluminium profiles this sturdy machine achieves stunning results.
You can print with two different colours or use support material like PVA thanks to the design with double extruders feeding to one hotend.
Easier than normal dual extrusion as you only need to level one nozzle. Or just convenient to have your two favourite filaments loaded booth at the same time ready for printing.
Nice 5” colour display with touch function. Smart and intuitive menu system where you can preview the model being printed.
WIFI support so you can communicate direct with your printer without cables.
Magnetic spring plate makes it easy to remove the printer models after finished print.
New developed MK12 extruder with efficient cooling system for the nozzle. Improved high-torgue feeding mechanism. Small Bowden tube feeding the hotend with less weight on the moving part, this means that you can improve print speeds.
Easy to adjut the X-Axis belt so you can fine tune your print result to get it even more accurate.
Easy levelling with larger levelling nuts that are easy to adjust.
Filament run out sensor with automatic resume
Very easy to assemble even for a novice. Units comes pre-assembled; all you need to do is to fasten a few screws. You will be printing in no-time.
VIDEO
.png?1671784274334)
