CREALITY SpacePi X4L filament dryer

CREALITY SpacePi X4L filament dryer

3D printing requires properly prepared filament. Even a small amount of moisture can negatively affect print quality, cause air bubbles, or lead to poor layer adhesion. The Creality SpacePi X4L filament dryer is designed to keep the material in optimal conditions before and during printing. The device uses smart sensors, temperature control, and an intuitive touch panel, making filament drying simple and accurate.

Smart temperature and humidity sensors

The SpacePi X4L uses advanced sensors to monitor the temperature and humidity inside the chamber. This allows the device to respond to even slight changes in parameters and maintain stable drying conditions. In practice, this means more uniform filament preparation, which translates into more consistent material flow during printing and better model quality.

LCD touch screen with function control

The device is operated via a clear LCD touch screen. The new design of the screen with anti-static coating ensures good visibility even in cooler conditions. The screen allows you to quickly set the drying time and temperature, while the automatic mode selects the appropriate parameters on its own. You can also check the humidity level inside the device in real time on the screen.

Double insulation for safety

The dryer casing is equipped with a double layer of insulation that retains heat inside the chamber. The drying temperature can reach up to 75°C, however the outside of the casing remains significantly cooler — around 60°C. This allows the device to operate safely even during use.

Wide thread compatibility

The Creality SpacePi X4L supports the most popular filaments used in 3D printing. The device is compatible with 1 kg or 2 kg spools and filaments with diameters of 1.75 mm and 2.85 mm. The chamber accommodates spools with a diameter of up to 200 mm and a width of up to 150 mm, making it compatible with many materials used in 3D printers.

Precise time and temperature control

The dryer allows you to set the temperature between 45 and 75°C and the operating time from 1 to 48 hours. This allows you to tailor the drying process to specific materials, such as PLA, PETG, TPU or other filaments that require moisture removal before printing.