Wifi controller SP108E for LED

Wifi controller SP108E for LED

SP108E

1. Features:

1) Long distance APP remote control via WIFI;

2) Support routing mode(AP) and LAN connection mode(STA);

3) Support almost every kind of one-wire or two-wire LED driver IC ;

4) Brightness adjustable, With 180 kinds of patterns and 8 kind of color adjustable patterns;

5) Creatively usingfrom-image-to-effect method for user toDIYany effect;

6) Support setting pixel number and segments number, able to control up to 2048pixels;

7) DC5V~24V widerangeworking voltage, preventing reverse connection of power supply;

8) User setting saving;

2. App control:

Both IOS version and Android OS version are available. (hardware should support WIFI)

Requires IOS version 10.0 or later;

Requires Android OS version 4.4 or later;

Search”LedShop”in App Store or Google pay or scan this QR code to download

3. Specifications:

Working temperature : -20~60 Degrees Celsius

Working Voltage : DC5V~24V;

Working Current :20mA~130mA;

Remote distance :30 Meters;

Product size : 85mm*45mm*22mm;

Product weight : 40g ;

Certificates : CE, RoHS;

4. Working Mode and Connecting:

AP(Access Point) mode:Controller and Phone connect directly, controller works as an access point.

Connect steps:

1) When the device is not connected to any WIFI network, power on the controller and wait for 20s and then controller will switch intoAP mode ;

2) In the WIFI setting page,find and connect the controller(named likeSP108E_xxx, the default pin code is 12345678),

3)Open the LED Shop App ,then the controller will be showed on the device list;

*STA(Station) mode:Controller and phone are in one same WIFI network, in this network, users can operate the controller smoothly.

Connect steps:

1)When the device is not connected to any WIFI network,power on the controller,controller will be remain inWait-For-Connet mode for 20 seconds;

2) Make sure that your phone is connected to a WIFI network, Open LED Shop APP, pressing the Add Device button,input the WIFI pin code, then press theOKto confirm and wait for the configure processing finish;

3) When controller successfully enter the WIFI network, it will be showed on the device list;

4) User can select the controller and remove it out of the network by pressing theRemove Device button,then the controller will switch into AP mode.