eSun ePLA-Silk
Shiny surface with silk luster, giving smooth, pearly and unique touch. No extra polishing needed, printing at a high detail results in a beautiful finish. Unique silky smooth appearance gives out shiny eye-popping glossy prints,
Stable Dimensional ToleranceStable Dimensional Tolerance
Minimum tolerance and low warping to ensure consistent feeding and stable prints, good layer bonding, less stringing, no bubbles, no cracking, easy handling, resulting in an outstanding surface finish and are highly precise.
Tangle Free & No Plugging
1KG filament reel, perfect roundness and very tight diameter tolerance, does not overlap or tangle. Melt well, feed smoothly and constantly without clogging the nozzle or extruder, high successful printing rate.
Wide Application
Silk PLA adds shiny and smooth effect based on ordinary PLA, which is perfect for arts & crafts projects, vases and any other 3D printed items that could benefit from a outstanding shiny appearance.
Good Printability
Support structure is easy to peel off, smooth and flat printed surface; High toughness, not easy to break; Keep all the advantages of PLA, easy to print, low shrinkage, no deformation; Printing speed is faster than ABS, PC, PA and other material.
![](https://files.coordi.net/coordinet/3DPrima/PicsFM//eSun/12867__eSun__001.jpg)
Basic Data | |
Filament Typ | PLA |
Diameter | 1,75 mm |
Weight | 1,00 kg |
Lenght | 344 m |
| |
Printing Parameter | |
Recomended Printing Temp Min | 190 ºC |
Recomended Printing Temp Max | 230 ºC |
Recomended Printbed Temperature Min | 45 ºC |
Recomended Printbed Temperature Max | 60 ºC |
Recomended Printing Speed Min | 40 mm/s |
Recommended Printing Speed Max | 100 mm/s |
Recomended Fan Speed Max | 100 >#/td### |
| |
General | |
Specific gravity | 1,21 g/cm3 GB/T 1033 |
| |
Elongation | |
Elongation at break | 14,4 % GB/T 1040 |
| |
Flexural | |
Flexural Strenght | 65 MPa GB/T 9341 |
Flexural Modulus | 1447 MPa GB/T 9341 |
| |
Other | |
Impact Strength | 5,86 KJ/m2 GB/T 1843 |