Αρχική/SINGLE BOARD COMPUTER/Intel® MAX® 10 FPGA Development Kit

Intel® MAX® 10 FPGA Development Kit

Κωδικός Κατασκευαστή (MPN): DK-DEV-10M50-A

ΚΩΔΙΚΟΣ: AA1224

MANUFACTURERINTEL MPNDK-DEV-10M50-A

Intel DK-DEV-10M50A MAX 10 FPGA Development Board Intel DK-DEV-10M50A MAX 10 FPGA development board is used in evaluating the performance and features of the Intel MAX 10 device. The board may be programmed using the embedded USB-Blaster II, or with an optional JTAG 10-pin header. The...

€581⁵⁰

Χωρίς ΦΠΑ: €468.95

Μη Διαθέσιμο

Παράδοση

— ELTA Courier
— ACS Courier
— ΓΕΝΙΚΗ ΤΑΧΥΔΡΟΜΙΚΗ

Τρόποι πληρωμής

Περιγραφή
Χαρακτηριστικά
Skroutz Αξιολογήσεις

Intel DK-DEV-10M50A MAX 10 FPGA Development Board

Intel DK-DEV-10M50A MAX 10 FPGA development board is used in evaluating the performance and features of the Intel MAX 10 device. The board may be programmed using the embedded USB-Blaster II, or with an optional JTAG 10-pin header.

The DK-DEV-10M50A power supply features Enpirion DC-DC converters. Interfaces include two gigabit ethernet ports, mini-USB 2.0 UART, HDMI, a universal high-speed mezzanine card (HSMC) connector, and two 12-pin Digilent Pmod compatible connectors.

Features

MAX 10 FPGA (10M50D, dual supply, F484 package)
Enpirion® EN2342QI 4 A PowerSoC Voltage-Mode Synchronous Step-Down Converter with Integrated Inductor Enpirion
EN6337QI 3A High-Efficiency PowerSoC DC-DC Step-Down Converters with Integrated Inductor
Enpirion EP5358xUI 600mA PowerSoC DC-DC Step-Down Converters with Integrated Inductor
MAX II CPLD - EPM1270M256C4N (On-board USB-Blaster ™ II)
Programming and Configuration:
- Embedded USB-Blaster II (JTAG)
- Optional JTAG direct via 10-pin header
Memory Devices:
- 64-Mx16 1 Gb DDR3 SDRAM with soft memory controller
- 128-Mx8 1 Gb DDR3 SDRAM with soft memory controller
- 512-Mb Quad serial peripheral interface (quad SPI) flash
Communication Ports:
- Two Gigabit Ethernet (GbE) RJ-45 ports
- Ethernet Port A (Bottom)
- Ethernet Port B (Top)
- One mini-USB2.0 UART
- One high-definition multimedia interface (HDMI) video output
- One universal high-speed mezzanine card (HSMC) connector
- Two 12-pin Digilent Pmod™ compatible connectors
Analog:
- Two MAX 10 FPGA analog-to-digital converter (ADC) SMA inputs
- 2x10 ADC header
- Potentiometer input to ADC
- One external 16 bit digital-to-analog converter (DAC) device with SMA output
Clocking:
- 25 MHz single-ended, external oscillator clock source
- Silicon labs clock generator with programmable frequency GUI

Kit Includes

Mini-USB cable for on-board USB-Blaster™ II
2A Power Supply and cord
Free Quartus® II Web Edition design software (download software and license from website)
Complete documentation
User manual, bill of materials, schematic, and board files

Front

Back

Προβλήθηκαν Πρόσφατα