The SONOFF Zigbee Bridge allows for quick pairing and control of ZigBee devices, thanks to the eWelink application. In this way, you can connect multiple intelligent switches, sockets and sensors to create a home network where you can configure individual actions, such as when the sensor detects too low a humidity level, the BASICZBR3 and ZigBee switch will automatically start the humidifier; when you open the bedroom door, the light will turn on automatically. Sonoff provides the necessary equipment and we are only limited by our imagination.
Wide compatibility
Sonoff ZigBee Bridge in combination with the intelligent traffic sensor SNZB-03 allow you to automatically switch on the light in the room according to your needs - now leaving the house is much easier, without worrying about unnecessarily switched on devices.
Long and perfect transmission signal
No fear of losing signal through the walls of your room. Just connect another ZigBee device to the PBX, which, like a router, provides a perfect transmission (up to 80m uninterrupted connection) between the charging device and the gateway.
Easy to use, thanks to the intelligent assistant
With Alexa you can control different devices with simple voice commands. Turn on, off, dim the lights, run fans, air purifiers, humidifiers, kettles and more. In addition, alarms, schedules, devices, locations and alarms can be used with Zigbee's intelligent switch to activate or deactivate devices.
All in one
The application allows you to group and use the devices shown on the home page. There is no need for separate cards to operate the devices - we can find them all on one page.
Specifications
Model
|
ZigBee Bridge
|
Input
|
5V 1A
|
Operating temperature range
|
-10 ° C ~ 40 ° C
|
WiFi
|
IEEE 802.11 b/g/n 2.4 GHz, ZigBee 3.0
|
Weight
|
35 g
|
Material
|
PC V0
|
Dimensions
|
62 x 62 x 20 mm
|